PRODUCT ADVICE
← All articles

HEARIT.AI / BLOG

HA-BES2710 MOD: Verify USB Recording Export

HA-BES2710 MOD board diagram showing the USB Type-C interface

A successful recording needs to reach the person or software that will use it. With HA-BES2710 MOD, verify the local USB handoff by matching the audio recovered on a computer to a known test clip. This check is useful when a prototype will be used offline and recordings must be reviewed later.

Make a clip you can identify by ear

With no program or device connected, single-press Mode to start local recording. The first status LED is solid red. Speak an identifier, a measurement and a closing phrase, then single-press Mode to stop and save. The first LED briefly confirms the save in green and returns to standby. Log the module and firmware version alongside the spoken clip identifier.

Verify the mounted volume and the exported audio

While the module is idle, triple-press Mode to enter USB mass storage with the target computer connected. The first LED keeps its previous color, so confirm entry by checking for the volume on the computer. Copy the candidate file and play it from the computer. Confirm the identifier, measurement and closing phrase. Run a second clip with a different identifier and check that you can distinguish both recovered files.

Check the handoff when something goes wrong

If the computer shows no volume, confirm that recording has stopped, check the data connection and repeat the idle-mode entry test. On a disposable test recording, triple-press during capture. The documented response is a fast red warning on the status LED while recording continues. Stop and save normally, then play back the recovered clip to confirm the expected content was retained.

Validate the receiving workflow before sign-off

Record which host configuration recognized the volume, which file was copied and who verified the playback. If a downstream transcription tool accepts the exported audio, compare its draft with the original file and confirm identifiers, units and numbers before entering them into a project record. Test an HA-BES2710 MOD sample with the actual host and receiving software before signing off on USB export for the integration.

Hearit Docs for HA-BES2710 MOD

HA-BES2710 MOD recording-state test