PRODUCT ADVICE
← All articles

HEARIT.AI / BLOG

HA-CS02 PCBA: Validate a Recorder Enclosure Before Tooling

HA-CS02 recorder reference board with its connected flex cable

An open board can capture clear speech while the same board inside a prototype case picks up button clicks or muffles the speaker. Use HA-CS02 PCBA to run an open-board and enclosed comparison before committing to tooling. The comparison should tell your team which mechanical or software decision to revisit.

Build two comparable samples

The reference board has two omnidirectional microphones, one bone-conduction microphone, a button, a toggle switch and a status LED. Record the board revision, firmware and fitted eMMC capacity on each sample. Keep those variables the same when comparing an open board with a prototype case. Mark the microphone openings, button travel and LED window on the case drawing so a review finding can be traced to a specific feature.

Test speech and handling in the same run

Use a short script with a part number, two similar-sounding names and a measurement with its unit. Record it at the intended working distance and repeat it while handling the prototype in the way users will. Play back both takes at the same listening volume. Note where speech becomes hard to follow and whether button operation or contact with the case masks any words. Repeat any suspect take before attributing the difference to the enclosure.

Follow one recording through transfer and review

The board offers optional 16, 32 or 64 GB eMMC configurations, 5 GHz Wi-Fi 6 and Bluetooth V6. Test the storage option fitted to your sample using the transfer path implemented in your prototype. Try the intended operating position and a deliberate connection interruption. Check whether the original recording remains recoverable and what the user sees when transfer resumes. For products with a transcription service, process the recovered audio and ask a reviewer to confirm the part number, names and unit against playback.

Make the tooling decision from the results

Record pass criteria before the test. A useful prototype gate is that the user can start and stop capture, recognize the status indication, recover the full file and verify the scripted details from its audio. If a configuration fails, log the sample and repeat the exact scenario after the change. Request an HA-CS02 PCBA evaluation sample with the intended storage and firmware configuration, and share your enclosure drawing and proposed transfer path when discussing OEM or ODM integration.

Hearit Docs for HA-CS02 PCBA

HA-CS02 PCBA board evaluation guide